Відео

Because $15k😂

I think is from Rock West Composites. Still a high temp resin (not as heat resistant as Dragonplate), but it's a little cheaper.

@@grahamwatson3677 It's from Protech composites and they lie about "developing the resin"

Um. It's definitely open source. Not sure where that comment came from?

Thank you!

I agree! It's pretty sweet!

That would be awesome!

I agree that this is not for the normal crowd! It's definitely geared towards business, but it's super cool that they allowed me to come check it out and make a video on it! There's a reason why you don't see many/any videos on this machine. It's because the businesses that own them don't make videos or can't because they're under NDA. So when I get a chance to make a video about an awesome machine that could do more than I have ever even thought about doing myself, I definitely jump at it! I hope you enjoyed the video! What would you Make if you had a printer with these capabilities?

I think it’s good to show such printers now and than to see what’s possible in 3D Printing. But yeah I bought a Snapmaker J1 instead 😅 It has a automatic X/Y calibration and a guided z calibration. Pretty easy to do. Only downside is I had in 3 months already 2 issues with it. Changed out X axsis rail and ribbon cable on the right extruder.

Ooh I like that! What would you test them on?

Hammer it into wood of different density or even sheetrock. Use them to hang a sign on that beautiful background wall.

Right! I need one too!

"We are thrilled to announce that Vision Miner, a global leader in industrial 3D printing solutions, has officially acquired AddWise." - well yeah I can see that being a thing.

I agree, I wish I could have shown it working! If I had more time there, I would have definitely done that. I can assure you that I have seen prints that have come off of them and they are awesome in person! They just did not have any running while I was there. But I can fix that and get us some footage!

Yes! They acquired that company , and I met the Guy who designed this printer! He was from the Ukraine and he now works in-house at Vision Miner with them! They are not going to put out garbage, I fully believe that!

@@TheEdgeofTech I actually wonder if the bad reviews were of the older design where you would burn your arms. I could see that as an unfavorable review.

@@ottersdangerden I heard from the company that those bad reviews were somewhat of a smear. These units are wildly improved over the initial beta level units. Nothing like the old addwise version.

I like this idea a lot! Thank you for watching!

@@TheEdgeofTech great content as usual

I think so too!

Why do you say that ?

@@TheEdgeofTech Could just be me but when I think open source I think like, any piece of info I could need is readily available. But there is no CAD model for this printer to download, there is no BOM so I can source my own, nor are there any instructions. They even said in their video about it that they developed their own proprietary XY motion system. Nothing except the specs for this printer are available to the public, therefor to me, and I think to most, this printer is not in the least bit open source.

@@coreypeacock9900 I understand what you're saying for sure! Pat, the hot end, board, power supply, Motors, etc. Etc are all readily available. We can get them right now If we want to. The board is open and not some proprietary firmware. I understand that the cad model is not available, But when it comes down to actual functionality and replacement parts, I believe it is. I will ask about the cad model because I'm curious though!

@@TheEdgeofTech I mean I get that but just because I can buy the parts for something, that doesn't make it open source... by that logic you can call a lot of things open source that simply are not. Yes those individual parts may be, but the unit as a whole is not. If something is open source, by definition that means enough knowledge about it is open to the public that it can be replicated or modified, such as Voron printers. No such information about this printer is available to the public besides SOME of the components it uses. Granted its my own opinion, but I just think that taking a handful of the components from the printer that are open source and calling the entire printer open source is very much a stretch.

@@coreypeacock9900 I totally understand what you're saying and do appreciate your opinion! I see it both ways. Aunt, I am definitely not saying you are incorrect. I'm going to bring this up to the team and see what they say. Again, totally understand what you're saying, and definitely respect it!

Interesting take on the printer. Is there anything about it that you DO like or is it all just bad??

​@@TheEdgeofTech the high temp for chamber and hotend are a nice thing. The idex is also good. The suction is a good Idea as well, but should be included for the price. There was nothing said about the slicer, this should also be included and made for the printer. Lidar is also no included, so you have to calibrate like 5 years ago. No beacon probe or similar included. This is just ridicolous for this price.

@@rammiii2908 thanks for responding! Actually it calibrates itself with the click of one button. There is no manual bed leveling and the slicer they use I believe is Prusa Slicer. And the probe is included.

​@@TheEdgeofTech how can the filament be calibrated without lidar or something? I don't talk about bed leveling. Where is the accelerometer? If this thing would be sold for "tinkerers" for 2k maybe 3k it would be okay, but 15k for a printer with technology from 2020 is just insane.

I hope you get to try one out, I'd love to see what you'd do with it!

It's an industrial product. "Temperature Rating 450°C" for the Slice Copper Head - and they stated in the video it can do 500C.

Thank you for your feedback! I can ask them about the speed and feeds, but mostly this thing would be used for very high temp filament and you would want to go slow for that. But it's definitely good info, so I will for sure ask!

@@3dexperiments I can't speak to that as I was going through what their specs are. But I will ask them! Thank you for watching!

@@3dexperiments They do state this in their own video as well. I imagine its possible for a company to state a rating is one thing, but then later seen that a higher rating is fine too, or there could be revision changes, not that I'd ever want to defend slice, but that sounds completely feasible.

Awesome! Me Too! Thanks for watching!

Same

Probably yes